Yealink for Divisible Rooms and Training Spaces
Yealink can provide the video conferencing, camera, audio and AV-over-IP technology used within larger professional meeting environments.
The Yealink MVC S90 professional AV architecture is particularly relevant to larger boardrooms, training rooms and divisible spaces where a conventional all-in-one video bar is no longer enough.
A Yealink-based design can incorporate intelligent cameras, professional microphones, DSP, room controllers and Microsoft Teams Rooms technology.
For flexible presentation environments, Yealink AV-over-IP equipment can also help route sources to different displays around the room.
In a divisible installation, the wider control architecture can determine which Yealink devices and AV routes are active according to whether the rooms are operating separately or together.
For example, two spaces could operate as independent Microsoft Teams Rooms during normal meetings. When the partition opens, the programmed room-combine workflow can establish the agreed larger-room arrangement, including the host conferencing system, required displays, audio zones and camera coverage.
GT designs the complete architecture rather than assuming that opening a partition automatically merges two conferencing systems.
Crestron Control for Divisible and Combinable Rooms
Crestron can provide another route for advanced room combining, automation and divisible-room control.
Crestron control processors can coordinate the wider AV environment while partition sensing provides information about whether movable walls are open or closed.
The control programming can then change the behaviour of displays, presentation sources, audio systems, cameras, conferencing equipment and room interfaces according to the selected configuration.
Crestron also documents divisible-space designs using multiple conferencing cameras, ceiling microphone arrays and separate conferencing endpoints, demonstrating how significantly the AV architecture can change between separated and combined modes.
For high-value spaces, technologies such as Crestron Automate VX can add more advanced multi-camera experiences.
GT can incorporate Crestron within a wider AV programming and control system where it is appropriate for the room and existing client technology standard.
Microsoft Teams Rooms in Divisible Spaces
Microsoft Teams Rooms can form part of a divisible room environment, but two individual Teams Rooms do not simply become one Teams Room because the partition has opened.
The AV design needs to establish what happens in each room state.
When divided, each space may have its own Microsoft Teams Room account, controller and conferencing system.
When combined, the design can nominate one system as the host Teams Room while the wider AV platform provides the additional microphones, loudspeakers, cameras and displays required across the enlarged space.
This allows users to retain the familiar Teams meeting workflow while a professional AV layer handles the complexity of the larger environment.
A properly configured system can still provide the experience employees expect: enter the room, select or join the scheduled meeting and use the room without understanding the routing and control taking place behind the interface.
GT can design these environments using technologies such as Q-SYS, Yealink, Crestron and professional third-party audio systems.
What Is a Divisible Meeting Room?
A divisible meeting room is a larger space that can be separated into two or more smaller rooms using movable, sliding or folding partitions.
The concept is common in conference centres, corporate offices, training environments, multipurpose spaces, universities and large workplace meeting areas because the same floor space can support different numbers of people throughout the day.
A simple example is one large training room divided into Room A and Room B. With the partition closed, both rooms can host separate Microsoft Teams meetings. When the wall is opened, the complete space can become one larger hybrid training room with shared displays, microphones, loudspeakers and cameras.
The physical wall may be simple. The AV design is not.
Opening the partition changes microphone coverage, loudspeaker zones, camera positions, displays, presentation routing and potentially the video conferencing system being used.
A properly engineered room combine AV system manages those changes so users do not have to manually reconfigure several different pieces of equipment.
Zoom Rooms in Divisible Meeting Rooms
The same principle applies to Zoom Rooms in divisible spaces.
Each room can operate independently while the partition is closed.
When the space is combined, partition state and AV programming can determine how cameras, microphones, loudspeakers, displays and conferencing signals are routed for the larger meeting.
Zoom itself publishes professional AV divisible-space designs where a partition sensor determines the room state and changes audio and video routing.
Platforms including Q-SYS can provide the professional AV layer around Zoom Rooms, while Yealink and Crestron also offer dedicated Zoom room technologies that can form part of an engineered environment.
The result should feel like one coherent Zoom meeting space rather than two smaller rooms that happen to have had the wall removed.

WORKPLACE AV. ENGINEERED TO PERFORM - INTELLIGENT TECHNOLOGY. DESIGNED FOR PEOPLE - HIGH-PERFORMANCE WORKPLACES. BUILT TO LAST -
Q-SYS Divisible Room AV Systems
Q-SYS is particularly suited to more advanced divisible meeting rooms and room combining applications because audio processing, cameras, video distribution, automation and room control can operate within the same wider platform.
GT can design Q-SYS workplace AV systems around the configurations that the space needs to support.
For more complex divisible environments, Q-SYS uses a Core-based architecture rather than treating the rooms as conventional independent meeting rooms.
When the partition is closed, the Q-SYS design can maintain separate audio zones and room functions. When the space is combined, the programming can change how those zones interact.
The same architecture can also coordinate networked cameras, professional audio, presentation sources, displays and conferencing integration.
Q-SYS Room Combining Example
Imagine three conference rooms arranged beside each other:
Room A | Room B | Room C
With both partitions closed, all three rooms operate independently.
Opening the first partition creates Room A+B, while Room C continues operating separately.
Opening the second partition instead could create Room A | Room B+C.
Opening both walls produces Room A+B+C, creating one large conference or training environment.
Q-SYS provides room-combining functionality capable of representing these different room and wall combinations.
The AV programming then determines what happens to the microphones, loudspeakers, displays, presentation sources and conferencing technology in each approved configuration.
This makes Q-SYS particularly useful where a divisible conference room has multiple possible operating states rather than simply switching between two rooms and one room.
Cameras in Divisible Conference Rooms
Camera coverage becomes more complicated when the shape and size of the room changes.
Two smaller rooms might each work effectively with one primary camera. Once the partition opens, neither camera position may provide suitable coverage of the complete combined environment.
GT therefore designs camera coverage around every supported room configuration.
A larger divisible room could use multiple PTZ or intelligent cameras positioned around the space. Depending on the platform, camera automation can select useful views of presenters or participants without requiring the person running the meeting to manually operate cameras throughout the call.
Q-SYS, for example, can support networked multi-camera designs and provide a single conferencing video feed to the collaboration platform while switching between suitable camera views.
More advanced environments can also use technologies such as Crestron Automate VX, where multiple cameras and microphones can be designed around high-value and divisible collaboration spaces.
The objective is the same: when the physical room becomes larger, remote participants should still see useful close views rather than one distant image of the entire room
Professional Audio for Divisible Rooms
Audio is one of the most important elements of a successful divisible room AV design.
When the rooms are separate, each space needs suitable microphone pickup and loudspeaker coverage without unintentionally sharing meeting audio with the neighbouring room.
Once the spaces combine, the audio system may need to operate across the complete environment.
Professional DSP can manage microphone mixing, acoustic echo cancellation, audio routing, room zones and loudspeaker feeds according to the current room configuration.
Depending on the project, GT can use ceiling microphones, table microphones, wireless handheld or lapel microphones, distributed ceiling loudspeakers, surface-mounted speakers or other professional audio technologies.
The design should also consider the acoustic performance of the movable wall itself. AV programming can keep signals separate, but it cannot compensate for poor physical sound isolation between two rooms.
Explore professional meeting room audio for more information about DSP, microphones and loudspeaker systems.
Make Your Divisible Space Simple to Use
A flexible room should not require a technical operator every time the partition moves.
GT can design the audio, video conferencing, cameras, displays, microphones, loudspeakers, partition sensing and control system around every way the space needs to operate.
Whether you are planning two meeting rooms that combine into one boardroom, a three-part conference suite, a divisible training room or a flexible hybrid event space, the objective is the same.
Close the wall and the rooms work independently.
Open the wall and the technology follows.
Send GT your floor plan, partition positions, required room combinations and preferred conferencing platform. We can help define the AV architecture and turn the different room states into a predictable experience for the people actually using the space.
Displays and Content Sharing in Divisible Spaces
Displays should remain useful in every room state.
When the room is divided, each space needs an appropriate front-of-room viewing position.
When combined, participants sitting in what was previously the second or third room may be too far from the original front display.
Additional displays can therefore be positioned around the space and activated according to the current room arrangement.
AV-over-IP is used in larger divisible environments because presentation and video sources can be distributed across the network to the displays that need them.
GT can design AV-over-IP and AV control systems where the required flexibility justifies a networked architecture.
Example Divisible Room – Two Training Rooms
Consider two training rooms separated by a movable acoustic partition.
During normal working hours, Training Room A and Training Room B host separate sessions.
Each room has its own display or displays, presentation connection, conferencing endpoint, cameras, microphones and loudspeakers.
The partition is then opened for a company-wide training session.
The partition sensor reports the change to the AV control system. The room-combine configuration activates and the AV system establishes the agreed host room.
Presentation content can now be distributed to displays on both sides of the former partition.
Microphones throughout the space become available to the combined conferencing session. The loudspeaker system distributes remote participants and programme audio across the complete audience area.
Additional cameras can provide useful views from the enlarged room.
The divisible space solution has quickly and easily changed from two rooms into one.
Example Divisible Conference Room – Two Meeting Rooms Become One
A corporate office might have two twelve-person meeting rooms separated by an operable wall.
Most of the week, the rooms operate independently for customer meetings and internal collaboration.
For quarterly meetings, the wall opens and the space becomes one larger conference room.
In separate mode, each room might have its own Microsoft Teams or Zoom Room.
In combined mode, one conferencing system becomes the agreed host while professional AV technology extends camera coverage, microphone pickup, loudspeaker coverage and content distribution into the second half of the space.
The displays in both areas can show the same presentation or conferencing content, helping participants throughout the combined room maintain a useful view.
Example Three-Part Divisible Conference Space
Larger conference facilities can use three or more combinable spaces.
A three-room environment may need to support:
A | B | C
A + B | C
A | B + C
A + B + C
Each configuration introduces different AV requirements.
Rather than asking users to understand signal routing, the control system can present the appropriate room configuration and automatically recall the required programming.
For this type of project, GT would agree the required room combinations before detailed design begins.
Divisible Boardrooms, Training Rooms and Event Spaces
Not every divisible room is used in the same way.
A divisible boardroom may prioritise premium camera views, table microphone coverage and high-quality conferencing.
A divisible training room might require presenter cameras, wireless lapel microphones, audience microphones and several displays.
A divisible conference room may need to support presentations during the day and larger hybrid meetings when the partition opens.
A multipurpose event space could add stage audio, handheld microphones, overflow displays or additional presentation sources.
GT designs the AV architecture around how the rooms are used.
Infrastructure for Divisible Room AV Systems
Flexible rooms require infrastructure to be considered early.
GT reviews the movable partition positions, rack location, displays, camera positions, microphone coverage, loudspeaker zones, AV network, USB connectivity, video distribution and control wiring before the system design is finalised.
Network switches may need to support professional audio, AV-over-IP, cameras and control traffic.
Cable routes should also account for the fact that equipment required in combined mode may be positioned in different parts of the room.
Where the project is part of a new office or refurbishment, GT can coordinate with architects, electrical contractors, IT teams, furniture suppliers and partition specialists so the physical room and the AV system are designed together.
Commissioning Every Room Combination
A divisible room should not be commissioned only in its largest configuration.
Every approved room state needs to be tested.
GT can verify the operation of separate rooms, combined spaces, conferencing calls, camera coverage, microphone pickup, loudspeaker routing, content sharing, touch-panel behaviour and partition sensing.
Isolation is also tested.
If Room A and Room B are separated, audio and presentation signals intended for Room A should not unexpectedly appear in Room B.
The system should also recover predictably after network interruption, equipment restart or power loss.
This testing is particularly important because many room-combine problems only appear when the physical configuration changes.
GT can document the completed system through AV design and project documentation and provide ongoing AV support and maintenance.
Upgrading an Existing Divisible Room
Older room-combine systems can become difficult to operate when control processors, DSPs, conferencing platforms or video distribution equipment have been changed at different times.
Typical problems include microphones working in the wrong room, displays showing incorrect sources, unreliable partition sensors, conferencing peripherals that do not follow the room configuration or touch panels that no longer represent the actual system.
GT can assess the existing AV architecture before deciding how much needs to be replaced.
Sometimes the correct solution is improved programming or DSP configuration. Other environments may benefit from replacing the control and signal-distribution architecture while retaining suitable displays, microphones, loudspeakers or cabling.
Divisible Room AV Installation Across the UK and Ireland
GT designs and delivers divisible meeting room and room combining AV systems across the UK, Ireland and wider EMEA.
Projects can include divisible meeting rooms in London, room-combine environments in Manchester, flexible conference spaces in Belfast and larger workplace AV projects across Dublin and other regional locations.
Delivery coverage also includes Maidenhead, Birmingham, Cambridge, Bristol, Cork, Galway, Edinburgh, wider Scotland and Wales.
GT can work alongside the wider project team from the early design stage through equipment supply, installation, programming, commissioning and handover.
Explore GT AV installation locations.
Frequently Asked Questions About Divisible Rooms
What is a divisible room?
A divisible room is a larger meeting, conference or training space that can be separated into two or more smaller rooms using movable partitions. The AV system can be designed so each area works independently when divided and operates as one coordinated environment when the spaces are combined.
What is a room combining AV system?
A room combining AV system changes how audio, video, displays, cameras, conferencing and room controls operate according to the physical configuration of the space.
When a partition opens, the AV system can apply a combined-room configuration. When the partition closes, the individual rooms can return to independent operation.
How does a partition sensor work in a divisible room?
A partition sensor detects whether a movable wall is present in its closed position. The sensor state can be passed to the control system so the AV programming knows whether rooms are divided or combined.
The system can then apply the appropriate audio, video and control configuration.
Can two Microsoft Teams Rooms combine into one room?
They can form part of an engineered divisible-room solution, but two Teams Rooms do not simply merge automatically.
The AV design needs to define which Teams Room hosts the meeting in combined mode and how the wider microphones, cameras, loudspeakers, displays and control systems connect to that workflow.
Can Zoom Rooms be used in divisible rooms?
Yes. Zoom Rooms can be incorporated into professional divisible-room designs. Partition sensing and external AV control can determine how audio, cameras, displays and other peripherals are routed according to whether the rooms are separated or combined.
Can Google Meet work in a divisible meeting room?
Yes, depending on the selected architecture. Platforms such as Q-SYS can provide professional USB audio and video integration with modern UC platforms, while BYOD solutions can allow a laptop running Google Meet to use compatible room cameras, microphones and loudspeakers.
Is Q-SYS suitable for divisible rooms?
Yes. Q-SYS provides dedicated room-combining functionality and publishes solutions specifically for divisible spaces. Complex combinable rooms normally use a Core-based Q-SYS architecture so audio, cameras, video distribution, conferencing and control can respond to the current room configuration.

Divisible Room AV Systems & Room Combining
Make one large room work just as well as two or three smaller spaces.
Divisible rooms are designed to change. A large conference room might operate as two independent meeting rooms during the working day, then open into one larger space for training, presentations, town halls or company events.
The challenge is making the technology change with it.
GT designs divisible room AV systems and room combining solutions where displays, cameras, microphones, loudspeakers, video conferencing, presentation sources and room controls respond to the way the physical space is being used.
When the movable partition is closed, each room can operate independently. When the partition opens, the AV system can reconfigure so the spaces work together as one larger environment.
GT can design these systems around professional platforms including Q-SYS audio, video and control, Yealink video conferencing, Crestron control and other professional AV technologies.
Explore our wider room types guide to compare divisible spaces with meeting rooms, boardrooms, training rooms and other workplace environments.
Making Opening and Closing the Room Easy
A well-designed divisible room enables an authorised user to select the required room configuration from a touch panel.
For example, opening the partition between Room A and Room B could tell the control system that the environment should now operate as Room A+B.
The control system can then apply the required AV configuration.
Audio routing changes. Microphones and loudspeakers become part of the larger room. Presentation sources can be distributed across additional displays. Cameras required for the larger space become available and the touch-panel interface changes to show the controls relevant to combined mode.
Closing the partition reverses that process and restores two independent rooms.
The exact behaviour is agreed during the AV design stage.
Partition Sensors and Automatic Room Combining
A partition sensor can detect whether the movable wall between two spaces is open or closed.
That information can be sent to the AV control system and used to trigger the appropriate room configuration automatically.
This means employees should not need to open a technical settings page and manually change audio routing, camera selection or video distribution every time the room changes.
In some environments automatic partition detection is the best solution. In others, GT may recommend manual room configuration controls or a combination of automatic sensing and authorised manual override.
The choice depends on how frequently the rooms change state, who operates the partitions and whether changing the configuration during an active meeting could cause disruption.
Changing from a divisible room to an all hands or to a pre-configured combination should be easy for the room user.
How Does a Divisible Room AV System Work?
Separate Mode – Two Independent Meeting Rooms
When a partition is closed, each side of a divisible conference room can operate as its own meeting space.
Room A might have its own display, Microsoft Teams Room, cameras, microphones and loudspeakers. Room B can simultaneously run a completely different meeting using its own technology.
The AV system keeps the rooms isolated so audio from one meeting does not enter the other system, presentation content is routed only to the appropriate displays and each room controller operates its own environment.
This separation is particularly important when both spaces are being used for confidential meetings or simultaneous video calls.
Combined Mode – One Larger Collaboration Space
When the movable wall opens, the room can change from two smaller meeting rooms into one larger conference, presentation or training environment.
Instead of leaving both AV systems operating independently, the room control system can change its configuration.
Microphone zones can be combined. Loudspeakers can reproduce the same conferencing and presentation audio throughout the complete space. Additional cameras can become available. Presentation content can appear on several displays and the appropriate conferencing system can become the host for the combined meeting.
The user experience should remain simple even though considerably more is happening behind the scenes.
This is where professional AV programming and room combine control become particularly important.
GT can provide AV programming and control system integration as part of the wider divisible-room design.


